N32C 1lb Vihtavuori Powder
$50.00
N32C 1lb Vihtavuori Powder
#VN32C1
The N32C (TIN STAR) is a specialized powder intended to provide low bulk density for cartridges that were originally designed for Cowboy Action Shooters shooting lead bullets with single-action revolvers and lever-action rifles. The use of more conventional gun powder results in poor load density, and fails to adequately fill the case. Vihtavuori’s N32C corrects this problem, and is ideally suited to many of the older cartridges used in Cowboy Action shooting, such as the .38 Special, .44 Special and .45 Colt.
The biggest benefit of N32C is its high loading volume. This porous powder fills the case much better than most conventional smokeless propellants, providing the loading density needed for those classic black powder cartridges. Compared to N320, the case filling ratio can be up to 50% higher. This also makes the powder safer to use – a reloader won’t be able to make double or triple loads in big volume cases by accident. Tin Star gives reliable ignition in all conditions, burns clean and leaves very little fouling or residue. It meters easily, making the task of producing high quality and uniform loads that you can depend on just that much easier. Handloads that you can depend on, shot, after shot, after shot. Vihtavuori N32C Tin Star delivers!
Other than being ideally suited to many of the older cartridges used in Cowboy Action Shooting, N32C is also very suitable for several other pistol calibers. It is also used for subsonic and blank loads.
- AR10 Competition Rifles
- Switch for Glock
- M15 Competition Rifles
- Auto Switch
- Auto Switch, Glock Switch
- Glock Switches
- M15 Light Tactical Carbines
- M15 Tactical Rifles
- Pistol Caliber Carbines
- M15 Light Tactical Carbines, M15 Tactical Rifles
- AR10 Tactical Rifles
- Bolt Action
- Ammunition
- Reloading Supplies
- Smokeless Powder
- Accurate
- CCI
- Federal
- Hodgdon
- IMR
- Remington
- Vectan
- Vihtavuori
- Winchester
- Primers
- 17-4PH Stainless Steel Sear
- acquire 5000 count primers
- AR-15 Fire Control Group Part
- AR-15 Machinegun Component
- arme de poing
- ATF Compliant Auto Sear
- Auto Sear for AR-15
- buy glock switch
- Buy Lightning Link
- buy magnum primers
- buy Winchester Small Rifle Primers 5000 Count
- FFL Dealer Parts
- get bulk Winchester primers
- get non-corrosive primers
- grab 5000 small rifle primers
- Large Rifle Magnum Primers
- Large Rifle Primers
- Legal Machinegun Parts
- Lightning Link for Sale
- NFA Compliant Sear
- order fortified cup primers
- order small rifle primers 5k
- pistolet 9mm
- pistolet semi-automatique
- primers
- Primers # 7
- Professional Gunsmithing Supplies
- purchase glock switch now
- purchase small pistol magnum
- purchase Winchester primers in bulk
- Registered Auto Sear
- Registered NFA Part
- Remington
- remington primers
- secure industrial-grade primers
- Select Fire Component
- shop bulk primers
- shop for Winchester 5k primer case
- Small Rifle Primers
- SOT Legal Parts
- SOT Manufacturer Supplies
- SOT Parts
- Stainless Steel Firearm Component
- Winchester
- Winchester Primers
Related Products
N340 1lb Vihtavuori Powder
#VN3401
Formerly known as 3N18, the N340 is a true multipurpose powder, developed originally for 9 mm and shotshell loads. This pistol powder is one of the most popular powders in the Vihtavuori N300 series, and it can be used for a wide variety of calibers and bullet weights, making it the perfect partner for all kinds of reloading purposes. The N340 is used especially for medium and large caliber pistols and shotshells with medium and heavy loads.
N340 is a tubular powder type with grain dimensions of 1,0mm length and 0,8 mm diameter. Exactly the same grain size as with powder N320, N330 and N350 – only the porosity of the powder changes.The burning rate of the N340 is at the medium scale of Vihtavuori handgun powders – and as with powder N320, with N340 extremely clean burning and no residuals is guaranteed.
Vihtavuori N3SL 4lb
Shotgun powder. Slightly faster burning than N320.
Vihtavuori 24N41 8lb
#VN24N418
Vihtavuori offers two rifle powders specifically for the .50 BMG case; 24N41 and 20N29. These are single-based treated powders, having very large grain size and extremely slow burning rates ideally suited to the .50 BMG. They also have some application in a few other very large capacity cases, such as the .338 Lapua Magnum and the .30-378 Weatherby Magnum.
N133 8lb Vihtavuori Powder
#VIN1338
Originally developed for 5.56 Nato cartridge, Vihtavuori’s N133 is a multipurpose rifle powder for centerfire .22 cartridges and PPC caliber cartridges.
N133 is a tubular powder with grain dimensions of 1,1 mm length and 0,8 mm diameter. The burn rate is medium in the scale of our rifle powders, and it works like a charm with .223 Remington, and practical shooters and other using the AR-15 will know the utmost quality of the N133. It is also a supreme choice for handloaders shooting 6 PPC standard rifle, and benchrest shooters all over the world rely on the combination of the Lapua .220 Russian brass and Vihtavuori N133 powder. This is probably the most popular powder in 100 meters and 200 meters bench rest shooting competitions: a countless number of competitions have been won using this reloading powder!
3N37 1lb Vihtavuori Powder
#VN3N37
Vihtavuori’s 3N37 handgun powder was originally developed for .22 rimfire cartridges, but has since proven to be very versatile and desirable within all competitive handgun shooting disciplines.
The 3N37 is tubular, porous powder type with grain dimensions of 0,6 mm length and 0,6 mm diameter. The symmetrical grain size makes metering a breeze in powder measures. The burning rate of the 3N37 is close to N350 and on the medium scale of our handgun powders.
This is an excellent powder for 9 mm major loads for IPSC open competitions and it’s very popular in USPSA and IPSC practical pistol shooting disciplines. In addition to practical shooting, 3N37 is also widely used as a submachine gun powder. As all of our powders, 3N37 offers consistent, extreme precision, with clean burning – and that is why it is used by the best shooters in the world.
Interesting fact: 3N37 was used back in the 1940’s by Sako for loading 9mm submachine gun cartridges.
N160 1lb Vihtavuori Powder
#VN1601
Vihtavuori’s N160 rifle powder is especially suitable for large and magnum calibers (especially belted Magnums) starting from 30-06 with heavier bullets, .243 Winchester, .260 Remington, 6.5 Creedmoor, 6.5×55 SE, 7 mm Weatherby Magnum, .300 Winchester Magnum, .338 Winchester Magnum and all the Winchester Short Magnums. It also fits large capacity/small bore cartridges like the 6.5-284 Norma.
N160 is a tubular powder type with grain dimensions of 1,3 mm length and 1,1 mm diameter. The burn rate of is medium to slow on the scale of our rifle powders. The N160 is commonly used for big game hunting ammunition especially with heavier bullets.
3N38 1lb Vihtavuori Powder
#VN3N38
Vihtavuori’s 3N38 powder is designed especially for competitive handgun shooting with high-velocity loads in 9 mm and .40 S&W cartridges. It’s a single-based, tubular powder type, and one of our small granule powders (0,6 mm length x 0,6 mm diameter). The 3N38 is a popular powder for practical shooting especially among IPSC and USPSA shooters. A relatively slow-burning powder, 3N38 is a perfect choice for making Major loads with good accuracy and clean-burning characteristics, for which Vihtavuori is renowned.
Vihtavuori N120 1lb
#VN1201
The N120 rifle powder by Vihtavuori works great in small calibers with light bullets and in short barrel rifles, especially in .222 Remington and 7,62×39. Formerly known as N 21, the powder is well-known and used also by the Finnish Army.
The burning speed of N120 is fast in the scale of our rifle powders, slightly slower than that of the N110. Vihtavuori N120 needs higher pressure than N110 in order to optimize the burning. The grain size is actually the smallest in our rifle powder family: only 0,8 mm length and 0,6 mm diameter. As with our other small sized powders, this makes the loadability and use in powder measures super easy.
Vihtavuori N120 gunpowder is used by many sport shooters, short-range target shooters and small game hunters.
N133 1lb Vihtavuori Powder
#VN1331
Originally developed for 5.56 Nato cartridge, Vihtavuori’s N133 is a multipurpose rifle powder for centerfire .22 cartridges and PPC caliber cartridges.
N133 is a tubular powder with grain dimensions of 1,1 mm length and 0,8 mm diameter. The burn rate is medium in the scale of our rifle powders, and it works like a charm with .223 Remington, and practical shooters and other using the AR-15 will know the utmost quality of the N133. It is also a supreme choice for handloaders shooting 6 PPC standard rifle, and benchrest shooters all over the world rely on the combination of the Lapua .220 Russian brass and Vihtavuori N133 powder. This is probably the most popular powder in 100 meters and 200 meters bench rest shooting competitions: a countless number of competitions have been won using this reloading powder!
N350 1lb Vihtavuori Powder
#VN3501
This is the slowest burning propellant in the N300 series. Burning speed is about like Blue Dot, “Hi-Skor” 800-X or No.7. Data is currently available for: 9mmLuger, .38 Super Auto, .38 Special, .357 Magnum, .44 Magnum and .45 Auto.
As the burning speed of N350 is at the slow end of our handgun powders, it is ideal for very heavy and top end velocities and energies for a broad range of pistol and revolver cartridges. N350 is widely used in pistol shooting and especially in practical shooting. N350 works excellent also in shotgun shooting with heavy hunting loads, especially with 36 gr loads or more.
N310 1lb Vihtavuori Powder
#VN3101
Well-known for its accuracy and extremely clean-burning, the N310 is used by pistol shooters reloading calibers from .32 S&W Long Wadcutter up to .45 ACP and many others requiring accurate handgun loads. The N310 is our fastest-burning handgun powder and the top choice for the competitive Bullseye pistol shooter.
Vihtavuori N310, known as N14 back in the old days, is a single-base, tubular powder type with grain dimensions of 0,7 mm length and 0,6 mm diameter. Thanks to its small size and almost symmetrical grain size, the powder flows smoothly and meters well in reloading measures. As with our other N300 series powders, N310 is a porous powder, in fact one of our most porous powder types. Porosity is a key factor influencing burning characteristics of powders; the more porous the powder, the faster the achieved burning rate.
Vihtavuori N310 is often used for light target loads, paired with light bullets, but it also works with heavier bullets. As a very versatile powder, it is suitable also for loading shotshells and is in fact used by shotgun ammunition manufacturers in their premium cartridges with light 24 gram target loads. The N310 is also used by many blank ammunition manufacturers.
N110 1lb Vihtavuori Powder
#VN1101
The N110 powder, formerly known as 4N19 and N3SS, is a tubular powder type with grain dimensions of 1,1 mm length and 0,8 mm diameter. The N110 is our fastest burning powder on our scale of rifle powders, making it a versatile product that can be used for pistol and rifleloadings. The ignition is best with small rifle primers, and it’s suitable especially for small rifle cases like .22 Hornet, .30 Carbine, but also Magnum pistol and revolver cartridges like .357 S&W Magnum, .41 Magnum, .44 Magnum, .454 Casull and .500 S&W. This powder is one of the favorites for hunting and varminting loads.

